SmartCover Aqua

Components

Application summary

SUBSTRATE PREPARATION AND WATERPROOFING
– The substrate must be clean, dry, smooth, firm and pore-free with no cracks or fractures.
– Apply a liberal coat of Waterproofing AQUA+.

FIBERGLASS MESH APPLICATION
– Set the Fiberglass Mesh and apply Union Bridge AQUA.
– Allow to dry for 2 hours.
– Estimated performance: 100-200 g/m2.

APPLY 2 COATS OF SMARTCOVER BASE AQUA (WITH GRAPHENE) WITH METAL TROWEL
– Mix 1 kg of SmartCOVER Base AQUA with graphene with 400-550 cc of Resin Mixture AQUA with graphene, depending on the workability may be required.
– Estimated performance: 1 kg/m2 per coat.
– Estimated pot life: 1 hour.
– Allow to dry for 6-8 hours.
– Sand with 80-grit.

APPLY 2 COATS OF SMARTCOVER FINE AQUA (WITH GRAPHENE) WITH PLASTIC TROWEL
– In order to obtain “burnt effect” apply the product with metal trowel.
– Mix 1 kg of SmartCOVER Fine AQUA with graphene with 400-550 cc of Resin Mixture AQUA with graphene, depending on the workability may be required.
– Estimated performance: 350 g/m2 per coat.
– Estimated pot life: 1 hour.
– Allow to dry for 3-8 hours.
– Sand with 120-grit.

APPLY A BEAD OF ACRILAT SEALER
– Estimated performance: 100 g/m2.
– After the coat allow to dry 2 hours.

APPLY TWO TOP COAT AQUA LAYERS COMPONENT A + COMPONENT B
– Mix the two components A and B in the proportion of 2 parts of A and 1 part of B, and homogenize with a stirrer. Let the mixture rest for a few minutes.
– Apply a generous layer and spread evenly. Let dry approx. 2 hours for matte and satin finishes, and 6 hours for gloss.
– Apply a second coat.
– Easy application, with 8 mm microfiber roller.