SmartCover Eco

Components

Application summary

SUBSTRATE PREPARATION AND WATERPROOFING
– The substrate must be clean, dry, smooth, firm and pore-free with no cracks or fractures.
– If necessary, apply a liberal coat of Waterproofing ECO+.

FIBERGLASS MESH APPLICATION
– Set the Fiberglass Mesh and apply Union Bridge.
– Allow to dry for 2 hours.
– Apply a second coat of Waterproofing ECO+.
– Allow to dry for 2 hours.
– Sand with 80-grit.
– Estimated performance: 100 g/m2.

APPLY 2 COATS OF SMARTCOVER BASE ECO (WITH GRAPHENE) WITH METAL TROWEL
– Mix 1 kg of SmartCOVER Base ECO with graphene with approximately 350 cc of water.
– Estimated performance: 1 kg/m2 per coat.
– Estimated pot life: 1 hour.
– Allow to dry for 6-8 hours.
– Sand with 80-grit.

APPLY 2 COATS OF SMARTCOVER FINE ECO (WITH GRAPHENE) WITH PLASTIC TROWEL
– In order to obtain “burnt effect” apply the product with metal trowel.
– Add approximately 300 cc of water and 100 cc of our liquid Concentrate Pigment to 1 kg of SmartCOVER Fine ECO with graphene.
– Estimated performance: 350 g/m2 per coat.
– Estimated pot life: 1 hour.
– Allow to dry for 3-8 hours.
– Sand with 120-grit.

APPLY A BEAD OF ACRILAT SEALER
– Estimated performance: 100 g/m2.
– Allow to dry for 2 hours.

APPLY TWO TOP COAT 2KS LAYERS COMPONENT A + COMPONENT B
– Mixture ratio: 4 kg of Resin / 1 kg of Hardener.
– Estimated performance per coat: 50-75 g/m2.
– Pot life: 1 hour.
– Allow product to dry between coats from 2 to 3 hours for a matte and satin finish, or 8 hours for a glossy finish.