SmartCover Hard

system

HARD System

Graphene micro-mortar for high pedestrian traffic, ideal for floors, walls and other surfaces in shopping centres, bars, restaurants, party venues, cinemas, etc. Guarantees high resistance to wear, abrasion and stain protection without neglecting design.

Components

  1. Waterproofing HARD+ (optional)
  2. Fiberglass Mesh
  3. Union Bridge
  4. SmartCOVER Base
  5. SmartCOVER Fine
  6. Resin Mixture with graphene
  7. Acrilat Sealer
  8. High Traffic Top Coat Parts A + B

Application summary

SUBSTRATE PREPARATION AND WATERPROOFING
– The substrate must be clean, dry, smooth, firm and pore-free with no cracks or fractures.
– If necessary, apply a liberal coat of Waterproofing HARD+.

 

FIBERGLASS MESH APPLICATION
– Set the Fiberglass Mesh and apply Union Bridge.
– Allow to dry for 2 hours.
– Estimated performance: 100 g/m2.

 

APPLY 2 COATS OF SMARTCOVER BASE WITH METAL TROWEL
– Mix 1 kg of SmartCOVER Base with graphene with 400-550 cc of Resin Mixture with graphene, depending on the workability may be required.
– Estimated performance: 1 kg/m2 per coat.
– Estimated pot life: 1 hour.
– Allow to dry for 6-8 hours.
– Sand with 80-grit.

 

APPLY 2 COATS OF SMARTCOVER FINE WITH PLASTIC TROWEL
– In order to obtain “burnt effect” apply the product with metal trowel.
– Mix 1 kg of SmartCOVER Fine with graphene with 400-550 cc of Resin Mixture with graphene, depending on the workability may be required.
– Estimated performance: 350 g/m2 per coat.
– Estimated pot life: 1 hour.
– Allow to dry for 3-8 hours.
– Sand with 120-grit.

 

APPLY A BEAD OF ACRILAT SEALER
– Estimated performance: 100 g/m2.
– Allow to dry for 2 hours.

 

APPLY TWO HIGH TRAFFIC TOP COAT LAYERS COMPONENT A + COMPONENT B
– Mixture ratio: 2 kg of Resin / 1 kg of Hardener.
– Estimated performance per coat: 100 g/m2.
– Pot life: 1 hour.
– Allow to dry between coats from 2 to 3 hours for a matte and satin finish, or 8 hours for a glossy finish.

These indications are based on our current state of technical knowledge and our experience. Due to the different conditions of application, it is advisable to conduct proper testing to determine the most adequate consumptions and dosages for each use. Product and information are destined for industrial use, for professionals with the necessary skills and knowledge to carry out an appropriate application. Other uses beyond those specified in this document are at your own risk.