Solid DRY is a range of admixtures designed with innovative graphene technology for the production of semi-dry concretes.
Plasticisers, superplasticisers and water repellents for dry-consistency precast production
High-activity water reducer – superplasticiser
| Density, 20 ºC | 1,093 ± 0,02 g/cm³ |
| pH, 20 ºC | 4,5 ± 7 |
| Dosage | 0,08–0,8 % |
| Density, 20 ºC | 1,093 ± 0,02 g/cm³ |
| pH, 20 ºC | 4,5 ± 7 |
| Dosage | 0,08–0,8 % |
| Density, 20 ºC | 1,000 ± 0,02 g/cm³ |
| pH, 20 ºC | 12 ± 1 |
| Dosage | 0,8–2,5 % |
Admixture for improving semi-dry concretes
Integral water repellent for concrete and mortar
Rheology-modifying admixtures with a plasticising and water-reducing effect, together with integral water repellents, specially designed for the production of dry and semi-dry consistency precast units requiring a good surface finish.
High compacting capacity.
Increases early and ultimate strengths by optimising cement hydration.
Improves the surface finish of the concrete.
Improves the consistency and workability of the concrete.
Improves the impermeability and durability of the concrete by reducing its porosity.
Gives the treated element water-repellent behaviour.
Increases the impermeability of the admixed concrete and the durability of the units.
Compatible with the use of pigments and colourants, and suitable for white cement.
Prevents the appearance of efflorescence and considerably reduces capillary water absorption.
Improves resistance to freeze-thaw cycles.
Lightweight precast concrete: pavers, kerbs and concrete floor infill blocks.
Semi-dry consistency precast concrete requiring a good surface finish.
Blocks, roof tiles, pipes and concrete units where efflorescence and water absorption need to be reduced.
Please consult our Technical Department for any application not listed here. The water repellent is not recommended for elements subjected to pressurised water or permanent immersion.
Plasticisers: 0.08–0.8 % by weight of cement. Water repellent: 0.8–2.5 %.
Added with the final portion of the water during mixing. The admixture must not be added onto the dry mix, as this reduces its effectiveness.
In bulk in tankers, in 1000 kg containers and 25 kg jerrycans.
Up to 12 months for the plasticisers and 6 months for the water repellent, in a closed original container in a cool, dry place.
Preliminary testing is always recommended, and compatibility between admixtures should be checked before use.
Impregnated equipment and tools can be cleaned with water, preferably hot.
We work with you to determine the optimum dosage for your precast plant and verify compatibility between admixtures.
Ctra. de Villena, km 0,5. 30510
Yecla (Murcia) Spain